2024 Isuzu NRR Regular Cab Cabover Truck, Class 5 19,500 lb GVWR, 5.2L turbocharged 4-Cyl diesel engine (4HK) 215 HP @2,500 RPM 452 lb.-ft @1,850 RPM, 6-Sp Aisin Automatic Transmission, four-wheel disk braking system with vacuum + power assist feature and ABS, steel wheels with 225/70R19.5F (12-pr) tires, 30-Gal in-frame fuel tank, LED head lamps, 3-passenger two-tone gray interior trim, Electronic Stability Control with Anti-Slip Regulation, A/C, AM/FM/BT/CD radio, ..., Model RL8 - Capacity: 8 yd 3 ; Hopper Capacity: 1 yd 3, Body Weight (body shell only): 2,917 lb; Body Weight (complete unit, less options): 7, 680 lb; Hopper Inside Width: 66.3 in.; Body Specifications - Sidewalls (curved shell): 10 ga. high tensile steel; Flat Floor (single sheet): 7 ga. high tensile steel; Roof (curved shell): 10 ga. high tensile steel; Ejector Panel Face: 10 ga. high tensile steel: Hopper: 3/16 in. 100 ksi T-1 (1/4 in. T-1 option); Packer Panel Face: 3/16 in. T-1 steel; Slide Panel Face: 3/16 in. high tensile steel; Hopper Sides: 3/16 in. T-1 steel (lower tailgate); 10 ga. high tensile steel (upper tailgate); Hydraulic System: Cylinder: Ejector: 2-stage 4.5 in. bore; Tailgate: (2) 3.5 in. bore; 2 in. rod; 20 in. stroke; Slide: (2) 3.5 in. bore; 2 in. rod; 19 in. stroke; Packer: (2) 3.5 in. bore; 2 in. rod; 19 in. stroke; Valves: Shutoff: Ball; Packing Controls: Sectional spool; Ejector/Tailgate Raise: Sectional spool; Operating Pressure in PSI: 2,400; Maximum Operating Pressure: 2,700; Gallons Per Minute (GPM): 21 GPM; Reservoir: 30 gal.; Packing Cycle Time: Complete: 15-17 sec.; Reload: 3 sec.; Compaction Rate in lb/yd.: 700-800 - Standard Features - Body: One-piece flat floor; Curved shell body; Fast cycle time; Wide open accessibility for cleaning and maintenance; Automatic latches and integrated tailgate props; The industrys highest standard for hydraulic cleanliness; LED lighting, weatherproof connections and braided loom; Dual Amber oval rear strobes; Heat-treated pins and replaceable bushings throughout; Sectional valves; Slide and Packer cylinders are interchangeable. - Safety: Meets or exceeds ANSI Z-245; Large access door with safety interlock; Emergency stop on curbside; Driver alert buttons on both sides. - For your smaller jobs, the Pac-Mac RL Series is up for the task and commonly used in narrow alley ways, parks, recreational areas, and hard to maneuver areas. This unit is available in 6, 8, 10 cubic yards with a compaction rate of 700-800 lb/yd. Our rear loader truck is engineered using the most advanced computer modeling systems, proving that Pac-Mac is committed to providing the highest quality products in the solid waste industry.